1.      Application:

It is a special tool for wire connectionwhen testing or repairing electric equipment. In earlier times, operators needto climb high to do maintenance work for equipment. The connection clamp devicesolved the problem. The operator can make the wire connection on ground.

2. Operation:

Install the clamp to the operation stick. Connectthe voltage and current conduct wire to the terminal of the clamp. Fix insections the conduct wire to the operation stick. There should be 20 cm space from the clamp when fixing thewire. Hold the operation rod so that the clamp is a little higher than theconnection position. Move the clamp to clip the jaw to the position. Slowly pullthe stick to tighten the clamp jaw. When take off the clamp, push the operationstick at the clamp direction upward and the jaw opens. Put the operation stickgently on ground.

2. Specification:

Wire connection terminal: Openness:   up to 70mm,

Function: rotational, can switch directionand angle; with inner locking device and release device; Shift the connectionwork onto ground, safe and efficient

The contact point is resistant to oxidationfilm, which ensures good contact and accurate testing.

High over-load capacity: In case of shortcircuit, the conduct current can be above 200A, with high over load capacity.

Applicable height: 6 m, 8m, 10m